Rugged Rack or Fixed Mount 4000 VA UPS

Part Number: ETI0001-1260AA
Rugged Rack or Fixed Mount
4000 VA UPS
Internal Isolation
Operational to 55º C
Reverse Airflow (Front to Rear)

4.0 kVA UPS and Frequency Converter
Rugged Rack or Fixed Mount Unit 
w/ Reduced Depth and Multiple Battery Modules for
Hours of Battery Backup between Locations
Accepts both Aircraft Power and Commercial Power

ETI0001-1260AA Rugged  UPS Standard Front Panel Layout
ETI0001-1260AA Rugged UPS Standard Front Panel Layout,
Shown w/ One Battery Expansion Module

ETI0001-1260AA Rugged  UPS Standard Rear Panel Layout
ETI0001-1260AA Rugged UPS Standard Rear Panel Layout,
Shown w/ One Battery Expansion Module

The field proven PowerStation™ UPS line is ideally suited for military, industrial, medical and telecommunications applications requiring high reliability, rugged construction, compact size and light weight design. These units are equally suited for use in shipboard, airborne, vehicular, field deployed or fixed locations with controlled or uncontrolled environments. The "ETI0001-1260AA" is being used by the US military because of their stringent performance and reliability requirements. 

The heavy-duty chassis, occupying only  3U (5.25") of rack space and 23.5" depth, has rounded metal corners and rugged front mounted handles, aiding in safe handling. Companion 2U (3.5" high) Battery Expansion Modules are designed to be daisy chained to bring up the backup time in the typical configuration.  In the typical application, the base UPS unit and up to four Battery Modules are mounted in the lower underside of a rack or cart. Both module chassis are constructed of brushed aluminum to minimize overall weight. Internally, all major components are well secured and electrically insulated to prevent damage due to shock and vibration. 

The internal shielded input transformer provides galvanic isolation with provisions for domestic (115 VAC, CONUS) and optionally for international (230 VAC, OCONUS) input voltages. Special EMI/RFI filters and input power factor correction minimize both input current and harmonics. This special transformer and filters result in ultra low input leakage current required for medical applications. The unit also operates as a frequency converter, taking 46-440 hertz input and converting it to clean, uninterruptible 60 hertz power. The input switch and the galvanic isolation transformer all provide a  double pole isolated source for systems or locations where phase references and grounding are not consistent.  For scenarios that need hospital grade power immediately and no AC source is available to run the UPS, the Cold Start push button allows the unit to start and run from its battery modules before external AC is available. 

The LED arrays keep the operator informed as to the unit's status including load and battery levels. The high intensity audible alarm can be heard in high noise environments. All controls and protective devices are brought to the front and rear panels with critical switches having finger guards. Further, all front panel devices are recessed to prevent damage or accidental operation. Various optional power distribution controls are available which mount on the front panel or remotely. 

The rear panel provides a locking connector for the input power and NEMA 5-15R output receptacles. Multiple input and output power panel options are available. Removable and washable air filters and a high capacity stainless steel ball bearing fans provide added protection in both controlled and hostile environments. The exhaust air is diverted out the front vent, with alternate air flow directions optional. The "ETI0001-1260AA" has the added benefit of having both an internal battery and external battery expansion modules. The external Battery Modules can be field replaced without having to shut the UPS down. This allows the backup time to be extended even further. The optional Battery Charger/Conditioner (which has aircraft and global input capability) is used to maintain the spare Battery Modules in ready condition at all times. The batteries are maintenance free with immobilized electrolyte and are constructed of flame retardant materials. For more information, see the Battery Technology section. The Status connector provides an interface with optional computer software providing loss of AC and low battery status as well as remote shut down capability. 

See the Power Distribution Units section for a listing of stand alone PDUs. See the N5 Series ETI0001-1479 for a version of this UPS with an integrated PDU and remote control.

Overall, the PowerStation line is uniquely qualified for critical shipboard, vehicle, airborne or land based systems combining advanced modular design features with highly reliable construction.

Technical Specifications: P/N: ETI0001-1260AA

Output voltage: 120 vac true sine-wave standard, others optional
Output rating: UPS 4000 va standard in 3U electronics chassis
0.65 to 0.75 pf standard,
Non-linear load capacity: Up to 100% non-linear load capability w/o de-rating
Output voltage regulation: UPS ± 3.0% static regulation of nominal
± 4.0% dynamic (0 to 50% load step)
Overload surge capacity: 110% for 10 minutes; 125% for 30 seconds
Harmonic distortion: Less than 5.0% into 100% non-linear load
Output frequency: UPS 60 or 50 Hz ± 2.5% synchronized to utility
60 or 50 Hz ± 1.0% w/ utility not available
Operational status Status, load and battery level LEDs, w/contacts
Adjustable level,+90 dB audible alarm w/on/off
Input voltage selection: Nominal 115 vac, optional auto-ranging input of 85-270 vac
Input voltage tolerance: UPS 85-135 vac @ full load without using battery, to 70 vac @ 75% load
Input frequency: From 46 hz to 70 hz standard, optional to 440 hz
Input power factor: Better than 99% typically
Input/output isolation: 4000 va, up to 120 dB common mode, <1.0 ma leakage
Input transient suppression: Complies with IEEE 587 and UL 1449
Input control/protection: Guarded 2 pole input breaker w/ UPS fuses
Optional cold start to turn on w/o ac present
Input power connection: MS3452W22-22P
Battery type: Maintenance free immobilized electrolyte,
Flame retardant materials, Oxygen Index 28+
Battery life: Rated for continuous service life of 5 years
DC protection: Panel mounted fuses standard, breaker optional
Battery expansion: Up to 24 hours w/ Battery Expansion Modules
Output circuits: One output via solid-state relays
Output control: Guarded Double Pole Circuit Breaker (CB2)
Output receptacles: MS3452W22-22S
Dimensions ( H x D x W ): UPS
  2U Battery Module
5.25 (3U) x 23.5 x 19.0 in (133 x 597 x 483 mm)
3.50 (2U) x 23.5 x 19.0 in (89 x 597 x 483 mm)
Rack Slide Mount Patterns: Jonathan, General Devices patterns standard, others optional
Alternate Mounting Options: Table, Wall, Floor, Portable, Horizontal/Vertical
Unit weight: UPS
  2U Battery Module
  95 lb. (  43 kg) with lift handles front and rear
105 lb. (  48 kg) with lift handles front and rear
Audible noise: Less than 47 dB @ 5.0 ft., ANSI "A" scale
Cooling type: High capacity, negative pressure, forced air
Cooling air direction: Front intake, exhaust to rear, others optional
Air intake filter: Washable metal filter media, others optional
Storage temperature: -40° to 158° F ambient (-40° to 70° C)
Operating temperature: 32° to 113° F ambient (0° to 45° C ), lower/ higher optional
Operating humidity: 0 to 95% relative humidity (non-condensing)
Storage elevation: Up to 40,000 ft (12,192 m), higher optional
Operating elevation: Up to 10,000 ft (3,048 m), higher optional
United States: Meets UL-1778 standard for UPS equipment,
167-1, 454, 810D, 901D Grade A, 1399, Sec 300A & 2000
Canada: CSA C22.2 No. 107 UPS safety requirements
EMI Protection: EMI/RFI FCC Part 15, Class A; EN55022; 461 
  Auto-ranging International Input, Cold Start, Alternate I/O Configurations, Dual Source Input, Battery Expansion, Battery-less Operation, Battery Charger/Conditioner, Power Distribution Units, Software Interface, Asynchronous serial COM port, 10BaseT Ethernet SNMP/HTTP port, Transport Cases, Slides and Mounting Kits

Get Product Information
*(denotes required field)
Contact ETI by mail at:
Energy Technologies, Inc.
219 Park Avenue East
Mansfield, OH 44902-1845

Contact ETI by phone or fax:
Voice: 419-522-4444
FAX: 419-522-4466